The "higher order" reset buttons don't reset drop down selections(E.g. the "reset parameters" button will not reset the geometry overflow selection in geometry1). However, the "reset geo1" button would reset the overflow selection in that case. I haven't reported this behavior as a bug because it has some creative applications when the mix draw order is switched to buffer->input.

The basic idea is:
frame delay between 1-29(works without delay too)
mix order set to frambufferX->input
mix at .5
press parameter reset or frambufferX reset or global reset(the actual global reset not in the global settings window)

around 0:33 I hit the reset fb0 parameters button and a 19 frame loop starts until I start bringing the mix back up around 1:05. Whats really cool is the loop is still effected by parameter changes despite mix and key being absent! Around 2:39 you can see some dithering adjustments during a loop. Wild stuff 👽

Blank NDI blue screen kicks off the loop. Then it's mostly the new masks and some LFOs.

Just a little demo of some basic painting tools I've been developing in VW2.5

the paint tool is RGBA but here I'm drawing with white and shaping with black, with a low alpha value.

Im using NDI as the primary channel and mixing in the drawing buffer.

around 2:30 is where I start tweaking fb0 and the fb0 pixelations.

around 5:30 is where I add in some negative mixing on fb1 and alleviate it with mix from fb3.